HOSFOAM

Building Material 01

provides excellent performance in heat conduction, compressive strength and moisture resistance

HOSFOAM is an expanded polystyrene insulation board. Through an advanced extrusion sheet line technology, HOSFOAM constitutes a tight, close-cell structure, which provides excellent performance in heat conduction, compressive strength and moisture resistance for all kinds of insulation needs. It has widely been used with masonry cavity walls, waterproofing projects and cold storage etc.

Hosfoam

To go along with steel structure building, iron house and colorful wave roofing

Cold storage, keep cool and water resistant

Vapor resistance of ground slab, cover of underground groove

Interior and exterior wall insulation systems, such as sunset wall or office ceiling

Wall and floor insulation for heat and noise

HOSFOAM Application

Specification

Hosfoam -Specification

THICKNES	WIDTH	LENGTH
15mm-60mm	600mm	1200mm

Product / Value Test Method

PROPERTIES	PRODUCT/VALUE	TEST METHOD
Density	43 kg/m3±5	CN52536
Compressive strength	>=1.8 kgf/cm2	CN52536
Flexural strength	>=2 kgf/cm2	CN52536
Water absorption	<=0.07 g/m2.h.mm Hg	CN52536
Thermo conductive	<= 0.029 Kcal/m.h.°c	CNS2536 25±5°C

Care And Caution For Applying

Although flame retardants additives, which prevent it from self-ignition, are added, HOSFOAM is not structure material nor fireproof product. Exposure to extreme temperature may melt HOSFOAM or cause fire. While applying HOSFOAM, proper flaming and fire barriers must be installed with.

HOSFOAM is not suggested to have direct contact with surface exceed 75℃, such as chimney, heater vent, steam pipe, etc.

Prolong exposure to sun light will cause color fading. While work outdoor, make sure place protection cover material over HOSFOAM and keep away from fire sources.

Do not use volatilizable-contain adhesive to avoid of eroding.